ISERink Setup Guide =================== .. toctree:: :maxdepth: 1 background/index requirements/index overview/index building/index testing/index next_steps/index configuration_tables/index Indices and tables ================== * :ref:`genindex` * :ref:`search` Changelog ========= - Version 1.4: Several clarifications and revisions made to various sections. Port to Sphinx. - Version 1.3: Instruction corrections made to various sections. Added additional details to define how to install based on two possible ISERINK configurations, one directly connected to the Internet and one behind a NAT/FW. - Version 1.2: Added section 3.4 describing how to configure AD to support IScorE. Note: AD is not released as part of ISERink. You can tie IScorE into an existing AD, create a new AD, or use IScorE's build in user account management system. - 3.1.2 changed to move details about network configuration elsewhere - 3.1.4 was added in order to walk through setting up static IP addresses and DNS (this changed all image numbers in 3.1.* and the step numbers) - 3.1.8 added the section to allow SSH through the firewall downloading the images is impossible without this step. - 3.3.2 added an alternative method that appeared for me that was needed to verify that the virtual machines were copied over. - 3.4.2 was edited to give full details on how to configure IScorE to be publicly accessible old documentation would give 400 and 502 errors - Version 1.1: First version released January 2015